Engine Cooling Pumps

Engine Cooling Pumps

Engine Cooling Pumps

Show:
Sort By:

Ancor Pump Pm40

Ancor Pump Pm40, Bronze body Neoprene impeller cooling pump...

624.09€ 599.13€ Ex Tax: 487.10€

Engine Cooling Pump Johnson F7B-9 ( 10-24277-03)

Engine Cooling Pump Johnson F7B-9 ( 10-24277-03), Standard equipped Johnson F7B-9 cooling pump. Johnson ref 10-24277-03. Volvo Penta engines code 858469. First installation for Volvo Penta engines: AD31A/31B/41A/41B AQAD30A/31A/40A/40B/41A AQD40A/41A D41A/41B MD31/31A/40A TAMD31/31A/31B/41/41A/41B TMD31/31A/31B/40A/40B/40C/41A/41B...

457.97€ 439.65€ Ex Tax: 357.44€

Manual Clutch Pump Ancor PM36F (Ancor)

Manual Clutch Pump Ancor PM36F (Ancor), Pumps clutches MANUAL to be connected to the engine via a belt, particularly suitable for on-board services...

764.54€ 733.95€ Ex Tax: 596.71€

Manual Clutch Pump Ancor PM40f (Ancor)

Manual Clutch Pump Ancor PM40f (Ancor), Self-priming elastic impeller pump With manual clutch to be connected to the motor via a belt, particularly suitable for onboard services, 1 `1/2 ports, flow rate It./min. 95/293..

840.32€ 806.70€ Ex Tax: 655.86€

Water Pump Johnson SPX 10-13021-1 F8B-8

Water Pump Johnson SPX 10-13021-1 F8B-8, The Heavy Duty range of multi-purpose bronze pumps are raw water resistant and have a compact design. These pumps are designed for a number of applications onboard and have gained a time-tested reputation for quality and reliability. With excellent self-priming capability, these pumps are ideal as cooling water pumps for marine engines, bilge pumps, deckwash pumps, fresh water pumps, fuel-transfer pumps and other applications. These pumps are also ideally..

774.60€ 743.62€ Ex Tax: 604.57€

St146 Original Ancor pump

St146 Original Ancor pump, Cooling pump for VM / Nanni / Sole / Bmw engines...

303.09€ 290.97€ Ex Tax: 236.56€

Ancor cooling pumps maintenance service kit. Contains 1829034 (Type Pm34)

Ancor cooling pumps maintenance service kit. Contains 1829034 (Type Pm34), Ancor cooling pumps maintenance service kit. Contains: Impeller, seals, bearings, cover with screws, cam, lubricant and user manual...

149.46€ 143.49€ Ex Tax: 116.66€

Ancor cooling pumps maintenance service kit. Contains 1829038 (Type Pm37)

Ancor cooling pumps maintenance service kit. Contains 1829038 (Type Pm37), Ancor cooling pumps maintenance service kit. Contains: Impeller, seals, bearings, cover with screws, cam, lubricant and user manual...

46.11€ 44.26€ Ex Tax: 35.99€

Ancor cooling pumps maintenance service kit. Contains 1829235 (Type St135)

Ancor cooling pumps maintenance service kit. Contains 1829235 (Type St135), Ancor cooling pumps maintenance service kit. Contains: Impeller, seals, bearings, cover with screws, cam, lubricant and user manual...

47.40€ 45.51€ Ex Tax: 37.00€

Ancor Original Pm34 pump

Ancor Original Pm34 pump, Bronze body Neoprene impeller cooling pump...

348.04€ 334.12€ Ex Tax: 271.64€

Ancor Original Pump Pm15

Ancor Original Pump Pm15, Bronze body Neoprene impeller cooling pump...

147.00€ 141.12€ Ex Tax: 114.73€

Ancor Original Pump Pm16

Ancor Original Pump Pm16, Bronze body Neoprene impeller cooling pump...

196.16€ 188.31€ Ex Tax: 153.10€

Ancor Original Pump Pm36

Ancor Original Pump Pm36, Bronze body Neoprene impeller cooling pump...

391.36€ 375.70€ Ex Tax: 305.45€

Ancor Original Pump St114

Ancor Original Pump St114, Cooling pump for Volvo Penta / Nanni / Ruggerini / Bukh engines...

154.86€ 148.67€ Ex Tax: 120.87€

Ancor Original Pump St138

Ancor Original Pump St138, Cooling pump for Volvo Penta AQ-BB-MB-MD-2000 / Lombardini Ldw / Aifo engines...

181.42€ 174.16€ Ex Tax: 141.59€

Ancor Original Pump St139

Ancor Original Pump St139, Cooling pump for Lombardini / Aifo / Vte Paguro 6000/8000 engines...

171.59€ 164.72€ Ex Tax: 133.92€

Ancor Original Pump St143

Ancor Original Pump St143, Cooling pump for Nanni / Beta Marine engines...

229.06€ 219.89€ Ex Tax: 178.78€

Ancor Original Pump St151

Ancor Original Pump St151, Cooling pump for Aifo 8361-8210-521 / Perkins / Deutz / VM engines...

342.49€ 328.79€ Ex Tax: 267.31€

Ancor pump St109

Ancor pump St109, Cooling pump for Farymann FK2 / Nanni FK2 - 2.40HE engines...

191.24€ 183.59€ Ex Tax: 149.26€

Ancor pump St137

Ancor pump St137, Cooling pump for Aifo / Nanni / Mitsubishi / Farymann FK3 engines...

179.95€ 172.75€ Ex Tax: 140.45€

Ancor St147 pump

Ancor St147 pump, Cooling pump for Perkins / Ford / Aifo / Nanni / Mercedes / VM engines...

242.93€ 233.21€ Ex Tax: 189.60€

bronze self-priming pump st140 (Ancor)

bronze self-priming pump st140 (Ancor), Bronze self-priming pumps, neoprene rotors, to be connected to the motor. Inputs 3/4, Capacity It./min. 21/56 for engines Aifo, BMW,C Power, CT Marine, Nanni, Lehman, VM, Mercedes, ecc. Spare impeller art.2727105..

263.36€ 252.82€ Ex Tax: 205.55€

bronze self-priming pump st149 (Ancor)

bronze self-priming pump st149 (Ancor), Bronze self-priming pumps, neoprene rotors, to be connected to the motor.Inputs Ø mm. 28, Capacity It./min. 21/56 for engines Aifo, Solé M636,SM636, VM 804M, 806M, Volvo MD22, Perkins, Ford, Mercedes. Spare impeller art.2727105..

268.44€ 257.70€ Ex Tax: 209.51€

Bronze self-priming pump ST319 (Ancor)

Bronze self-priming pump ST319 (Ancor), Bronze self-priming pumps, to be connected to the motor. Inputs 3/4, capacity lt./min. 5/70. For Onan engines 6.5-10kw. Spare impeller art.2726166..

426.35€ 409.29€ Ex Tax: 332.76€

bronze self-priming pump st347 (Ancor)

bronze self-priming pump st347 (Ancor), Bronze self-priming pumps, to be connected to the motor. Inputs from mm.26 to mm.32, capacity lt./min. 10/69. For Volvo engines D2-55A/ D2-55B/ D2-55C/ D2-55D/ D2-55E/ D2-55F. Spare impeller art.2727105..

402.97€ 386.85€ Ex Tax: 314.51€

Bronze self-priming pumps PM35 (Ancor)

Bronze self-priming pumps PM35 (Ancor), Bronze self-priming pumps, neoprene rotors, to be connected to the motor (substitute for PM 34). Inputs 3/4, Capacity It./min. 18/49. Spare impeller art. 2727105..

330.47€ 317.25€ Ex Tax: 257.93€

bronze self-priming pumps st135 (Ancor)

bronze self-priming pumps st135 (Ancor), Bronze self-priming pumps, neoprene rotors, to be connected to the motor. Inputs 3/8, Capacity It./min. 13/28 for engines Ruggerini,Lombardini, Nanni, Mitsubishi, Lister Petter, Watermota. Spare impeller art. 2727101..

170.71€ 163.88€ Ex Tax: 133.24€

Cooling Pump jabsco 29440-1001

Cooling Pump jabsco 29440-1001, Jabsco 29440-1001 flexible impeller crankshaft mounted pump has the same dimensions as the 29440-1051 however uses a full cam. Jabsco Pump 29440-1001 Engine Suitability: - FNM AM 20, AM 45, ATM 60 - Lancing Marine BMC 5.7, BMC 6/98, BMC 4.248 - Ford V6 2.3, V6 2.5, V6 2.8, V6 3.0, XLD 416 - GM / Bedford 220, 330 - Mercedes OM314, OM321, OM352 - Peugeot XD2 1.9, XD2 2.5 - Watermota 11-30, 50..

594.40€ Ex Tax: 483.25€

Cooling Pump Jabsco CW404

Cooling Pump Jabsco CW404, This Jabsco pump kit contains a pump with a pulley and is designed to offer a replacement for the Jabsco 6490-253 and 6490-223 pumps. Variations in the plane of the pulley drive on some engines may require enlargement of pedestal bolt slots in the new CW404 pump. The Jabsco CW404 has a 159mm (6-1/4") diameter pulley for A or B section belt. Output: Nominal 40 litres / min at 1500rpm. Connections..

608.71€ Ex Tax: 494.88€

Jabsco Pulley for Pulley Driven Pumps (5" Diameter)

Jabsco Pulley for Pulley Driven Pumps (5" Diameter), Jabsco pump pulley suitable for use with Jabsco 52040-2001 engine cooling pumps. This pulley has a diameter of 127mm (5") and is suitable for a 17mm shaft. Specifications Brand Jabsco Diameter 127mm (5") to suit 17m..

217.95€ Ex Tax: 177.20€

Jabsco Pump Bearing 18752-0000 for Jabsco Engine Cooling Pumps

Jabsco Pump Bearing 18752-0000 for Jabsco Engine Cooling Pumps, Jabsco pump bearing suitable for use with Jabsco flexible impeller cooling pumps, including Jabsco: 17360-1001, 17490-0001, 17970-0000, 18760-0001, 18760-0002, 18760-0003, 18760-0004, 18760-0013, 18760-3000, 18780-0001, 18780-0003, 18780-0013 and 18790-0001 pumps. The Jabsco 18752-0000 bearing has a width of 16mm, and OD of 62mm and a 30mm ID. Jabsco UK par..

37.23€ Ex Tax: 30.27€

Jabsco Pump Bearing 92600-0040 for Jabsco Impeller Cooling Pumps

Jabsco Pump Bearing 92600-0040 for Jabsco Impeller Cooling Pumps, The Jabsco pump bearing is for use with Jabsco flexible impeller cooling pumps. This Jabsco Pump Bearing is for the following Pumps: 11870-0001, 11870-0003, 11870-0004, 11870-0005, 11870-0006, 11870-0007, 12600-0001, 12600-0011, 12600-0021, 2570-0001, 2570-0021, 2570-0051, 2570-0151, 2570-0211, 2570-3000, 3110-0001, 3110-0011, 3240-0011, 3240-1001, 3570-..

88.74€ Ex Tax: 72.15€

Jabsco Pump Bearing 92600-0060 for Jabsco Engine Cooling Pumps

Jabsco Pump Bearing 92600-0060 for Jabsco Engine Cooling Pumps, This replacement Jabsco 92600-0060 bearing is suitable for use with 1" BSP flexible impeller cooling pumps. The bearing measures 21mm wide with a 47mm outside diameter and a 20mm inside diameter. This Jabsco Pump Bearing is for the following Pumps: 10170-0011, 12280-0001, 14210-0001, 17030-0001, 17040-0001, 17050-0001, 17050-0002, 2300-9001, 2300-9003, 230..

83.04€ Ex Tax: 67.51€

Jabsco Pump Bearing 92600-0070 for Jabsco Engine Cooling Pumps

Jabsco Pump Bearing 92600-0070 for Jabsco Engine Cooling Pumps, The Jabsco pump bearing is for use with Jabsco 3/4" BSP flexible impeller cooling pumps. This Jabsco Pump Bearing is for the following Pumps: 11850-0701, 11850-0711, 12050-0001, 3270-0001, 3890-9011, 8830-0701, 8830-0711, 8850-0001. Specifications Width 16mm ..

85.87€ Ex Tax: 69.82€

Jabsco Pump Bearing Seal for Jabsco Engine Cooling Pumps

Jabsco Pump Bearing Seal for Jabsco Engine Cooling Pumps, This replacement Jabsco pump shaft seal has a width of 7mm, an outside diameter of 35mm and an inside diameter of 17mm. 52040-2001, 52040-2003, 52040-2021, 52040-2401, 52051-2051. Specifications Width 7mm Brand ..

17.17€ Ex Tax: 13.96€

Jabsco Pump Bearing SP2601-0457 for Jabsco Impeller Cooling Pumps

Jabsco Pump Bearing SP2601-0457 for Jabsco Impeller Cooling Pumps, The Jabsco pump bearing for Jabsco flexible impeller cooling pumps can be used as both the pump end bearing and drive end bearing. 29450-1101, 29450-1431, 29450-2131, 29450-2231, 29450-1201, 29450-1231, 29450-1301, 29450-1401, 29400-1001, 29400-1051, 29400-1101, 29400-1151, 29460-1001, 29460-1101, 29460-1201, 29460-1251, 29460-1301, 29460-1401, 29460-2..

20.07€ Ex Tax: 16.31€

Jabsco Pump Bearing SP2601-39 for Jabsco Engine Cooling Impeller Pumps

Jabsco Pump Bearing SP2601-39 for Jabsco Engine Cooling Impeller Pumps, This replacement Jabsco SP-2601-39 pump shaft seal has a width of 11mm, an outside diameter of 35mm and an inside diameter of 15mm. 10550-01, 10550-205, 10550-2103, 10550-200, 10550-2701, 10590-01, 10950-200, 10950-201, 10950-204, 10950-205, 10950-2101, 10950-2201 ,10970, 10970-21, 11570-200, 21140-200, 21140-201, 21140-204, 21140-2101, 21140-2308..

20.07€ Ex Tax: 16.31€

Jabsco Pump Cam Plate & Wear Plate Kit for Jabsco Engine Cooling Pumps

Jabsco Pump Cam Plate & Wear Plate Kit for Jabsco Engine Cooling Pumps, Genuine Jabsco wear plate and cam plate for the 3/4" Jabsco flexible pumps. The cam plate (sometimes called a comb plate) is the standard flow version - 490 and the wear plate (7883) is also included. Jabsco UK Part Number: 7884, Jabsco USA Part Number: 7884-0000, Obsolete Part Number: 3266. This Cam / Wear Plate is for the following Pumps: Cam P..

117.34€ Ex Tax: 95.40€

Jabsco Pump Cam Plate 23341-0000 for Jabsco 29700 Engine Cooling Pumps

Jabsco Pump Cam Plate 23341-0000 for Jabsco 29700 Engine Cooling Pumps, The genuine Jabsco cam plate is designed specifically for the Jabsco range of flexible impeller cooling pumps. The cam plate, often referred to as a comb plate deforms the flexible impeller blades to create a flow of liquid inside the pump. The cam plate is a wearing part inside of the pump and should be inspected regularly and replaced when needed ..

119.61€ Ex Tax: 97.24€

Jabsco Pump Cam Plate 2763 for Jabsco Flexible Impeller Cooling Pumps

Jabsco Pump Cam Plate 2763 for Jabsco Flexible Impeller Cooling Pumps, The genuine Jabsco cam plate is designed specifically for the Jabsco range of flexible impeller cooling pumps. The cam plate, often referred to as a comb plate deforms the flexible impeller blades to create a flow of liquid inside the pump. The cam plate is a wearing part inside of the pump and should be inspected regularly and replaced when needed t..

123.11€ Ex Tax: 100.09€

Jabsco Pump Cam Plate 2907-0001 for Jabsco Impeller Cooling Pumps

Jabsco Pump Cam Plate 2907-0001 for Jabsco Impeller Cooling Pumps, The Jabsco 2907-0001 cam plate is the same as the Jabsco USA part number 2907-0000 cam and will replace Johnson 01-45288 cams. The cam plate, often referred to as a comb plate deforms the flexible impeller blades to create a flow of liquid inside the pump. The cam plate is a wearing part inside of the pump and should be inspected regularly and replaced w..

85.87€ Ex Tax: 69.82€

Jabsco Pump Cam Plate 490 for Jabsco Flexible Impeller Cooling Pumps

Jabsco Pump Cam Plate 490 for Jabsco Flexible Impeller Cooling Pumps, This Genuine Jabsco cam plate, often referred to as a comb plate deforms the flexible impeller blades to create a flow of liquid inside the pump. The cam plate is a wearing part inside of the pump and should be inspected regularly and replaced when needed to maintain pump performance. The Jabsco 490 is the UK part number for this cam plate; the Jabsc..

65.84€ Ex Tax: 53.53€

Jabsco Pump Cam Plate 6988 for Jabsco Flexible Impeller Cooling Pumps

Jabsco Pump Cam Plate 6988 for Jabsco Flexible Impeller Cooling Pumps, The genuine Jabsco cam plate is designed specifically for the Jabsco range of flexible impeller cooling pumps. The cam plate, often referred to as a comb plate deforms the flexible impeller blades to create a flow of liquid inside the pump. The cam plate is a wearing part inside of the pump and should be inspected regularly and replaced when needed ..

111.64€ Ex Tax: 90.77€

Jabsco Pump Cam Plate 934 for Jabsco Flexible Impeller Cooling Pumps

Jabsco Pump Cam Plate 934 for Jabsco Flexible Impeller Cooling Pumps, The genuine Jabsco cam plate 934-0000 replaces obsolete Jabsco 9420 cam plates and the Johnson 01-42679 cam plate. This Jabsco Cam Plate is for Jabsco Flexible Impeller Cooling Pumps: 9710, 9760, 11600, 11120-200, 11410-200, 11740-200, 11740-205, 11860-0001, 11860-0003, 11860-0004, 11860-0005, 11860-0006, 11860-0007, 14420-0001, 21080-200, 21140-200,..

51.51€ Ex Tax: 41.87€

Jabsco Pump End Cover Gasket 17365-1000 for Jabsco Engine Cooling Pump

Jabsco Pump End Cover Gasket 17365-1000 for Jabsco Engine Cooling Pump, Jabsco 17365-1000 end cover gasket for Jabsco engine cooling pumps, typical applications include pump fitted to Caterpillar engines. The Jabsco 17365-1000 is the UK number for the Jabsco 17365-0000 (USA) gasket, these are the same gasket. Jabsco 17365-1000 (17365-0000) End Cover Gasket Pump Applications Jabsco 17360-1001, 17490-0001, 17970-0000, 18..

25.77€ Ex Tax: 20.95€

Jabsco Pump End Cover Gasket 1985-0000 for Flexible Impeller Pumps

Jabsco Pump End Cover Gasket 1985-0000 for Flexible Impeller Pumps, Jabsco 1985-0000 gasket for pump end cover plates, which was popular on early Jabsco Water Puppy pumps. This end cover gasket is also fitted to Jabsco 29440 series crankshaft mounted engine cooling pumps, including: Jabsco 29440-1001, 29440-1051, 29440-1101 and 29440-1201, as well as Jabsco 12520 series bronze utility transfer pumps: 12520-0001, 12520-00..

20.07€ Ex Tax: 16.31€

Jabsco Pump End Cover Plate 11831-0000 for Jabsco Engine Cooling Pumps

Jabsco Pump End Cover Plate 11831-0000 for Jabsco Engine Cooling Pumps, This Jabsco 11831-0000 end cover plate has 6 connection holes and is suitable for use with Jabsco 1" flexible impeller cooling pumps. This Jabsco end cover USA version of the Jabsco 3993 UK part number, they are the same end cover plate and both replace Johnson 01-42441 covers. Jabsco 11831-0000 End Cover Pump Applications: 10800-21, 11120-200, 111..

48.67€ Ex Tax: 39.57€

Jabsco Pump End Cover Plate 17378-1000 for Jabsco Engine Cooling Pumps

Jabsco Pump End Cover Plate 17378-1000 for Jabsco Engine Cooling Pumps, This replacement Jabsco pump end cover plate 17378-1000 is suitable for Jabsco flexible impeller raw water cooling pumps, as fitted to bigger marine engines, for example Caterpillar engines. This End Cover is for the following Pumps: 17360-1001, 17490-0001, 18200-0000, 18200-0002, 18760-0001, 18760-0002, 18760-0003, 18760-0004, 18760-0013, 18760-30..

307.12€ Ex Tax: 249.69€

Jabsco Pump End Cover Plate 23825-0000 for Jabsco Engine Cooling Pumps

Jabsco Pump End Cover Plate 23825-0000 for Jabsco Engine Cooling Pumps, This Jabsco end cover plate has 4 connection holes and is suitable for use with Jabsco utility puppy flexible impeller cooling pumps. This Jabsco End Cover Plate is for the following Pumps: 50370-1001, 50370-2001 and 50360-1001. Specifications Brand Jabsco ..

48.67€ Ex Tax: 39.57€

Jabsco Pump End Cover Plate 53085-0000 for Jabsco Utility Puppy

Jabsco Pump End Cover Plate 53085-0000 for Jabsco Utility Puppy, This Jabsco 53085-0000 end cover plate assembly is suitable for use with 53080 Series Jabsco Utility Puppy flexible impeller cooling pumps. Specifications Brand Jabsco Diameter 95mm ..

56.31€ Ex Tax: 45.78€