Flaps Trim tabs

Flaps Trim tabs

Flaps Trim tabs

Show:
Sort By:

Bennett Hydraulic Power Unit – 24 Volt (Indemar)

Bennett Hydraulic Power Unit – 24 Volt (Indemar), Bennett V351hpu2 Hydraulic Power Unit - 24v Pump A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check a..

603.06€ 578.94€ Ex Tax: 470.68€

Bennett trim tabs kit M80 with Stainless Plates 200x250 mm (Indemar)

Bennett trim tabs kit M80 with Stainless Plates 200x250 mm (Indemar), Trim tabs kit for small boats. The particular shape of the blades provides a force on plane 30% higher than conventional flaps. Thanks to their space-saving design can be installed on any stern. The kit contains: control flaps electro hydraulic with oil tank, 2 actuators (length mm. 290 mm stroke. 58), 2 stainless steel tables, joints, hydraulic hose mt. 6, shielded electrical cable mt. 6.50, control panel with 2 toggle switch..

971.26€ 932.41€ Ex Tax: 758.05€

Kit 2 Electromechanical Actuators Trim Tabs Uflex 273mm 12v (Uflex)

Kit 2 Electromechanical Actuators Trim Tabs Uflex 273mm 12v (Uflex), The use of electromechanical trim tabs allows the boat to constantly maintain a set-up suitable to the various navigation conditions, allowing a higher engine efficiency and a significant fuel saving. Tabs not included into the package..

920.92€ 884.09€ Ex Tax: 718.77€

Kit EIC5000 Bennett 12V for 4 actuators

Kit EIC5000 Bennett 12V for 4 actuators, EIC5000 Bennett 12V indicator waterproof control panel with rocker switches, digital trim LED indicators and dimmer. Complete with Auto Tab Retractor (ATR) that automatically retracts the flaps once the keys are withdrawn. It can be mounted on any boat with Bennet flaps. For double stations additional control panel and switch should be purchased.The pack is composed of: 72x72 mm Control panel - 85x110xH45 Control unit with ATR - 2 or 4 Actuator heads with..

1,025.22€ 984.22€ Ex Tax: 800.18€

Kit Flaps Bennett M80 with Stainless Plates 25x30cm (Indemar)

Kit Flaps Bennett M80 with Stainless Plates 25x30cm (Indemar), Kit Trim Tabs Bennett M80. Trim tabs kit for small boats. The particular shape of the blades provides a force on plane 30% higher than conventional flaps. Thanks to their space-saving design can be installed on any stern. The kit contains: control flaps electro hydraulic with oil tank, 2 actuators (length mm. 290 mm stroke. 58), 2 stainless steel tables, joints, hydraulic hose mt. 6, shielded electrical cable mt. 6.50, control pane..

995.50€ 955.68€ Ex Tax: 776.97€

kit Trim Tabs Bennett 12v Without Plates (Cec)

kit Trim Tabs Bennett 12v Without Plates (Cec), Electro-Hydraulic trim tab control panel complete with pump, oil tank, 2 actuators (length 350 mm., stroke 63 mm.) fittings, 6 m. hydraulic hose, 6,5 m. screened electric cable. (Not include switch panel and tabs )...

702.26€ 674.17€ Ex Tax: 548.11€

kit Trim Tabs Bennett 24v Without Plates (Cec)

kit Trim Tabs Bennett 24v Without Plates (Cec), Electro-Hydraulic trim tab control panel complete with pump, oil tank, 2 actuators (length 350 mm., stroke 63 mm.) fittings, 6 m. hydraulic hose, 6,5 m. screened electric cable. (Not include switch panel and tabs )...

709.82€ 681.43€ Ex Tax: 554.01€

Kit Trim Tabs Flaps Bennett 129 300 x 230mm

Kit Trim Tabs Flaps Bennett 129 300 x 230mm, Electric 12V Bennett trim tab kit complete with 2 actuators, 2 Stainless Steel tabs and control unit. For boats from 5.8 to 7.3 meters. Control panel have to be ordered separately. Panel cod. 4723535: standard up-down control panel. Panel cod. 4723537: up-down control panel with Auto Tab Retractor (automatically retracts the flaps once the keys are withdrawn). Panel cod. 4723539: up-down control panel with Auto Tab Retractor (automatically retracts t..

845.05€ 811.25€ Ex Tax: 659.55€

Pair of stainless steel Trim Tabs Bennett mm.406x229 (Indemar)

Pair of stainless steel Trim Tabs Bennett mm.406x229 (Indemar), Original stainless steel plates pair Bennett..

451.73€ 433.67€ Ex Tax: 352.57€

Pair of stainless steel Trim Tabs Bennett mm.508x229 (Indemar)

Pair of stainless steel Trim Tabs Bennett mm.508x229 (Indemar), Original stainless steel plates pair Bennett..

575.01€ 552.01€ Ex Tax: 448.79€

Pair of stainless steel Trim Tabs Bennett mm.610x229 (Indemar)

Pair of stainless steel Trim Tabs Bennett mm.610x229 (Indemar), Original stainless steel plates pair Bennett..

575.01€ 552.01€ Ex Tax: 448.79€

Panel Indicator Bennett EIC 2000 12v (Indemar)

Panel Indicator Bennett EIC 2000 12v (Indemar), Trim indicator with variable light trim for day and night, provided with an automatic trim tabs closure system. Pulling out the starter key tabs automatically go to rest position. Completely tight. Dims. mm. 70 x 70..

710.63€ 682.21€ Ex Tax: 554.64€

Panel Indicator Bennett EIC 2000 24v (Indemar)

Panel Indicator Bennett EIC 2000 24v (Indemar), Trim indicator with variable light trim for day and night, provided with an automatic trim tabs closure system. Pulling out the starter key tabs automatically go to rest position. Completely tight. Dims. mm. 70 x 70..

726.25€ 697.20€ Ex Tax: 566.83€

Trim Kit 12v Ocean Marine

Trim Kit 12v Ocean Marine, Maintenance free and easy installation electromechanical system that does not require hydraulic control unit and tubing. The kit includes actuators and control panel.To be completed with Stainless Steel tabs...

492.22€ 472.53€ Ex Tax: 384.17€

Auto Tab Retractor ATR Control Bennett 12v (Indemar)

Auto Tab Retractor ATR Control Bennett 12v (Indemar), Bennett ATR Trim Tab Auto Retractor 12Volt AR512 . ATR control to put tabs back to rest position pulling out starter key, not to damage stainless steel shaft...

194.57€ 186.78€ Ex Tax: 151.86€

Auto Tab Retractor ATR Control Bennett 24v (Indemar)

Auto Tab Retractor ATR Control Bennett 24v (Indemar), Bennett ATR Trim Tab Auto Retractor 24Volt AR512 , ATR control to put tabs back to rest position pulling out starter key, not to damage stainless steel shaft...

194.57€ 186.78€ Ex Tax: 151.86€

BENNETT - Solenoid Valve 12v Green Cable (Indemar)

BENNETT - Solenoid Valve 12v Green Cable (Indemar), Solenoid Valve 12v ..

100.64€ 96.61€ Ex Tax: 78.55€

BENNETT - Solenoid Valve 12v Red Cable (Indemar)

BENNETT - Solenoid Valve 12v Red Cable (Indemar), ..

100.64€ 96.61€ Ex Tax: 78.55€

BENNETT - Solenoid Valve 24v Green Cable (Indemar)

BENNETT - Solenoid Valve 24v Green Cable (Indemar), SOLENOID VALVE 24v..

100.64€ 96.61€ Ex Tax: 78.55€

BENNETT - Solenoid Valve 24v Red Cable (Indemar)

BENNETT - Solenoid Valve 24v Red Cable (Indemar), SOLENOID VALVE 24V..

100.64€ 96.61€ Ex Tax: 78.55€

Bennett Hydraulic Power Unit – 12 Volt (Indemar)

Bennett Hydraulic Power Unit – 12 Volt (Indemar), Bennett V351hpu2 Hydraulic Power Unit - 12v Pump Hydraulic Power Unit A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir..

567.19€ 544.50€ Ex Tax: 442.68€

Bennett RM24 Relay Module 24v (Indemar)

Bennett RM24 Relay Module 24v (Indemar), Relay to avoid control panel burnt when buttons up-down pushed at same time...

135.18€ 129.78€ Ex Tax: 105.51€

Bracket Uflex -Lenco Flaps Actuator (Uflex)

Bracket Uflex -Lenco Flaps Actuator (Uflex), Adaptation bracket for the assembly of the article 5454876 to the pre-existing holes in the case of previous installations with Lenco o systemsUflex AS12...

41.69€ 40.03€ Ex Tax: 32.54€

Hydraulic tube for Flaps Bennet 6mt (Indemar)

Hydraulic tube for Flaps Bennet 6mt (Indemar), Hydraulic hose m. 6, Ø interior mm. 4, exterior Ø mm. 6,5..

75.99€ 72.95€ Ex Tax: 59.31€

kit 2 Cylinderinder with fittings Flaps Bennet (Indemar)

kit 2 Cylinderinder with fittings Flaps Bennet (Indemar), Kit to drive 4 hydraulic cylinders actuators. Complete with 2 Cylinderinders actuators and fittings...

403.42€ 387.28€ Ex Tax: 314.86€

LCD screen display 12-24v to Check Flaps Angle (Cec)

LCD screen display 12-24v to Check Flaps Angle (Cec), LCD display panel showing trim tabs angle in 2 scales with figure from 0 to 9. Green light on screen. 12/24 V power. Dims. 85x50 mm. To combine with art. 5454823..

229.86€ 220.67€ Ex Tax: 179.40€

Lectrotab Trim Tab Bat Type Switch (Single Station)

Lectrotab Trim Tab Bat Type Switch (Single Station), Lectrotab replacement 'shorting' bat handle switch suitable for single station control panels. A shorting switch is a "make before break" switch where the switching action is accomplished after electrical connections have been made across the terminals during the circuit changeover. Specifications Voltage ..

104.80€ Ex Tax: 85.21€

Nauticus SX Smart Automatic Flaps Sx10512-70 (7-8mt)

Nauticus SX Smart Automatic Flaps Sx10512-70 (7-8mt), Rust and galvanic corrosion resistant reinforced thermo-molded Polymer Smart Tabs SX automatic flaps. They automatically set and keep the level / stabilize the boat thanks to the progressive actuator's spring. Do not require to be set and do not require control box or operator adjustment. Fast and easy installation without drilling. Save money by saving fuel. Increase thrust and top speed. Plane in half the time. Reduce bow lift angle.&n..

293.82€ 282.07€ Ex Tax: 229.32€

Nauticus SX Smart Automatic Flaps SX9510-40 (4-5mt)

Nauticus SX Smart Automatic Flaps SX9510-40 (4-5mt), Rust and galvanic corrosion resistant reinforced thermo-molded Polymer Smart Tabs SX automatic flaps. They automatically set and keep the level / stabilize the boat thanks to the progressive actuator's spring. Do not require to be set and do not require control box or operator adjustment. Fast and easy installation without drilling. Save money by saving fuel. Increase thrust and top speed. Plane in half the time. Reduce bow lift angle.&nb..

263.75€ 253.20€ Ex Tax: 205.85€

Nauticus SX Smart Automatic Flaps Sx9510-60 (5-6mt)

Nauticus SX Smart Automatic Flaps Sx9510-60 (5-6mt), Rust and galvanic corrosion resistant reinforced thermo-molded Polymer Smart Tabs SX automatic flaps. They automatically set and keep the level / stabilize the boat thanks to the progressive actuator's spring. Do not require to be set and do not require control box or operator adjustment. Fast and easy installation without drilling. Save money by saving fuel. Increase thrust and top speed. Plane in half the time. Reduce bow lift angle.&nb..

263.75€ 253.20€ Ex Tax: 205.85€

Pair of inductive sensor to check trim tabs angle (Cec)

Pair of inductive sensor to check trim tabs angle (Cec), Pair of inductive sensorto check trim tabs angle. Very easymounting on transom near trimtabs. Completely tight with 12 m.cable and stainless steel mountingbrackets. ( To combine with panelart. 5454824 or with indicator art.5454825)..

214.89€ 206.29€ Ex Tax: 167.72€

Pair of stainless steel Trim Tabs Bennett mm.305X229 (Indemar)

Pair of stainless steel Trim Tabs Bennett mm.305X229 (Indemar), Inoxoriginali steel plates pair Bennett..

334.91€ 321.52€ Ex Tax: 261.40€

Pair of Universal Stainless Steel Trim Tabs 500 x 230 mm (Cec)

Pair of Universal Stainless Steel Trim Tabs 500 x 230 mm (Cec), Pair of stainless steel tabs, thickness mm. 3..

238.82€ 229.26€ Ex Tax: 186.39€

Pair of Universal Stainless Steel Trim Tabs 600 x 230 mm (Cec)

Pair of Universal Stainless Steel Trim Tabs 600 x 230 mm (Cec), Pair of stainless steel tabs, thickness mm. 3..

289.04€ 277.48€ Ex Tax: 225.59€

Pair of Universal Stainless Steel Trim Tabs mm.400x230 (Cec)

Pair of Universal Stainless Steel Trim Tabs mm.400x230 (Cec), Pair of stainless steel tabs, thickness mm. 3..

215.14€ 206.54€ Ex Tax: 167.92€

Sensor with green cable Flaps Bennett (Indemar)

Sensor with green cable Flaps Bennett (Indemar), Sensor for detecting the position of the boards. They are mounted directly on the hydraulic cylinders, and are connected to the position indicators. Complete with 6mt cable...

102.35€ 98.26€ Ex Tax: 79.89€

Spare hydraulic cylinder Bennett 290mm (Indemar)

Spare hydraulic cylinder Bennett 290mm (Indemar), Bennett Trim Tabs Actuator. Hydraulic actuator cylinder length 290 mm., stroke 58 mm...

176.71€ 169.64€ Ex Tax: 137.92€

Spare hydraulic cylinder Bennett 350mm (Indemar)

Spare hydraulic cylinder Bennett 350mm (Indemar), Bennett Trim Tabs Actuator. Hydraulic actuator cylinder length 350 mm., stroke 63 mm...

172.03€ 165.15€ Ex Tax: 134.26€

Stainless Steel Flaps Plates Uflex 228 x 228 mm (Uflex)

Stainless Steel Flaps Plates Uflex 228 x 228 mm (Uflex), Pair of mirror polished stainless steel tab..

158.81€ 152.46€ Ex Tax: 123.95€

Stainless Steel Flaps Plates Uflex 228 x 305 mm (Uflex)

Stainless Steel Flaps Plates Uflex 228 x 305 mm (Uflex), Pair of mirror polished stainless steel tab..

178.07€ 170.95€ Ex Tax: 138.98€

Stainless steel Flaps Plates Uflex 30.5 x 45.7cm (Uflex)

Stainless steel Flaps Plates Uflex 30.5 x 45.7cm (Uflex), Pair of mirror polished stainless steel tab..

297.11€ 285.22€ Ex Tax: 231.89€

stingray classic hydrofoils black 3<>40 hp

stingray classic hydrofoils black 340 hp, StingRay Classic are the best and the most sold Hydrofoil stabilizer in the world. Made of hydrophilic water-absorbing material that eliminates friction. -Save money by saving fuel.-Increase thrust and top speed.-Plane in half the time.-Stabilize the boat.-Reduce chinewalking and porpoising...

83.47€ 80.13€ Ex Tax: 65.15€

StingRay Hydrofoil Classic Grey 3-40hp

StingRay Hydrofoil Classic Grey 3-40hp, StingRay Classic are the best and the most sold Hydrofoil stabilizer in the world. Made of hydrophilic water-absorbing material that eliminates friction. -Save money by saving fuel.-Increase thrust and top speed.-Plane in half the time.-Stabilize the boat.-Reduce chinewalking and porpoising...

83.47€ 80.13€ Ex Tax: 65.15€

Switch Panel Bennett ES2000 (Indemar)

Switch Panel Bennett ES2000 (Indemar), Bennett Es2000 Euro Style Rocker Switch This control is ergonomically designed, water resistant and provides a positive "click" when the trim tabs are engaged. Its lockout feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 1/2-inch Rocker Switch hole. 2 tactile switches. Dims. mm.70x70x40 depth. Warning : Never push at same time buttons up and down.Motor is i..

166.23€ 159.59€ Ex Tax: 129.74€

Uflex Flaps Actuator 273-330mm (Uflex)

Uflex Flaps Actuator 273-330mm (Uflex), AC actuatorcomplete with brackets and electric connection cable length mt.1,operating stroke mm.57..

431.13€ 413.88€ Ex Tax: 336.49€

Bennett RM12 Relay Module 12v (Indemar)

Bennett RM12 Relay Module 12v (Indemar), Relay to avoid control panel burnt when buttons up-down pushed at same time...

135.18€ 129.78€ Ex Tax: 105.51€

Electric cable Flaps Bennet 6.5mt (Indemar)

Electric cable Flaps Bennet 6.5mt (Indemar), Screened electric cable 6.5 m...

78.12€ 74.99€ Ex Tax: 60.97€

fittings kit for control panel Flaps Bennet (Indemar)

fittings kit for control panel Flaps Bennet (Indemar), Connecting pipe Kit for control unit..

49.03€ 47.07€ Ex Tax: 38.27€

Led indicator for Flaps Trim Taps

Led indicator for Flaps Trim Taps, Trim tabs angle LED indicator 2 scales with red LED, can be seen also with sun. Complete with feeder. Flush mount Ø mm. 52. To combine with art 5454823..

267.35€ 256.66€ Ex Tax: 208.67€

Electro-mechanical Actuators 12V complete with Control Panel 12v (Matromarine)

Electro-mechanical Actuators 12V complete with Control Panel 12v (Matromarine), Electro-mechanic actuators 12 V complete with control panel. It is a new mechanism in the cylinder : an electric motor drives gears driving the piston. Accurate and powerful, can be compared to hydraulic models. Stroke 61 mm...

429.18€ 412.01€ Ex Tax: 334.97€