Engine Mounts

Engine Mounts

Engine Mounts

Show:
Sort By:

Engine Shock Absorber-Marine Engine Mounts VD M12 150KG

Engine Shock Absorber-Marine Engine Mounts VD M12 150KG, V structure flexible mount for big stress with little load. For small engines working most of the time at low run...

106.68€ 102.42€ Ex Tax: 83.26€

Cotton Reel Bobbin Engine Mounting (10mm Stud)

Cotton Reel Bobbin Engine Mounting (10mm Stud), Cotton reel style of bobbin flexible engine mount with 25mm of M10 stud either end. 60mm diameter by 35mm long rubber section. Shore hardness of 45. These cotton reel type engine mountings were very popular with boat builders fitting the BMC1.5 and BMC1.8 based diesel engines. BMC part number was 10K5009. We would suggest that these flexible mounts are fitted in pairs to..

34.70€ Ex Tax: 28.21€

Engine mount for Caterpillar 1130-1270 kg RECDF4408-4

Engine mount for Caterpillar 1130-1270 kg RECDF4408-4, Caterpillar Engine mount For engines 3208 over 340 hp.Weight range: 2500 - 2800 lbsStud 1 "" - 14.Mount hole centers: 5 " Reference: RECDF4408-4 Engine Mount Caterpillar. For engines 3208 (over 340 hp). Weights between 1150 och 1270 kg. Stud: 1"-14. Mount hole centers: 5"...

292.32€ Ex Tax: 237.66€

Engine mount for Caterpillar 820 - 1000 kg RECDF238-M1

Engine mount for Caterpillar 820 - 1000 kg RECDF238-M1, Caterpillar Engine mount For engines: 3208 & 3304Bfrom 85-340 hp.Stud 3/4 "- 16.Mount hole centers: 5 "Weight range: 1800 - 2200 lbs Reference: RECDF238-M1 Engine Mount Caterpillar. For engines 3208 & 3304B (85-340 hp). Weights between 815 and 1000 kg. Stud: 3/4"-16. Mount hole centers: 5"...

169.63€ Ex Tax: 137.91€

Engine Mount for Cummins Engines ECDF477-M-3

Engine Mount for Cummins Engines ECDF477-M-3, Cummins Engine mount For engines 3.9L 4 Cylinder y 5.9L 6 Cylinder from 80-370 hp.Stud 3/4 ".Mount hole centers: 5 "Weight range: 950 - 2000 lbs Reference: RECDF477-M-3 Engine Mount for Cummins • Cummins 3.9 ltr. 4-cyl. • Cummins 5.9 ltr. 6-cyl. • 80-370 hp • Stud: 3/4" • Mounting hole centers: 5" • Weight: 430-900 kg..

283.31€ Ex Tax: 230.33€

Engine Shock Absorber-Marine Engine Mounts L M20 400KG

Engine Shock Absorber-Marine Engine Mounts L M20 400KG, Flexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore)..

166.67€ 160.01€ Ex Tax: 130.09€

Engine Shock Absorber-Marine Engine Mounts L M20 800KG

Engine Shock Absorber-Marine Engine Mounts L M20 800KG, Flexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore)..

166.67€ 160.01€ Ex Tax: 130.09€

Engine Shock Absorber-Marine Engine Mounts M M16 150KG

Engine Shock Absorber-Marine Engine Mounts M M16 150KG, Flexible mounts for medium power Diesel engines. Det Norske Veritas certified. 110 mm length M16 threaded stud. (SH = Shore)..

78.16€ 75.04€ Ex Tax: 61.00€

Engine Shock Absorber-Marine Engine Mounts M M16 225KG

Engine Shock Absorber-Marine Engine Mounts M M16 225KG, Flexible mounts for medium power Diesel engines. Det Norske Veritas certified. 110 mm length M16 threaded stud. (SH = Shore)..

78.16€ 75.04€ Ex Tax: 61.00€

Engine Shock Absorber-Marine Engine Mounts ROUND L M16

Engine Shock Absorber-Marine Engine Mounts ROUND L M16, Flexible mounts for large power Diesel engines. 110mm length M16 threaded stud. (SH = Shore)..

85.06€ 81.66€ Ex Tax: 66.39€

Engine Shock Absorber-Marine Engine Mounts ROUND S M12

Engine Shock Absorber-Marine Engine Mounts ROUND S M12, Flexible mounts for small power Diesel engines. 100mm length M12 threaded stud. (SH = Shore)..

36.86€ 35.39€ Ex Tax: 28.77€

Engine Shock Absorber-Marine Engine Mounts S M12 50KG

Engine Shock Absorber-Marine Engine Mounts S M12 50KG, Flexible mounts for small power Diesel engines. Det Norske Veritas certified. 100 mm length M12 threaded stud. (SH = Shore)..

36.86€ 35.39€ Ex Tax: 28.77€

Engine Shock Absorber-Marine Engine Mounts S M12 80KG

Engine Shock Absorber-Marine Engine Mounts S M12 80KG, Flexible mounts for small power Diesel engines. Det Norske Veritas certified. 100 mm length M12 threaded stud. (SH = Shore)..

36.86€ 35.39€ Ex Tax: 28.77€

Engine Shock Absorber-Marine Engine Mounts Y M16 120KG

Engine Shock Absorber-Marine Engine Mounts Y M16 120KG, Yanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..

110.61€ 106.19€ Ex Tax: 86.33€

Engine Shock Absorber-Marine Engine Mounts Y M16 50KG

Engine Shock Absorber-Marine Engine Mounts Y M16 50KG, Yanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..

110.61€ 106.19€ Ex Tax: 86.33€

Engine Shock Absorber-Marine Engine Mounts 100mm (Ancor)

Engine Shock Absorber-Marine Engine Mounts 100mm (Ancor), Antivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results.The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%...

53.86€ 51.71€ Ex Tax: 42.04€

Engine Shock Absorber-Marine Engine Mounts 130mm screw (Ancor)

Engine Shock Absorber-Marine Engine Mounts 130mm screw (Ancor), Antivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results.The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%...

66.01€ 63.37€ Ex Tax: 51.52€

Engine Shock Absorber-Marine Engine Mounts 180mm screw (Ancor)

Engine Shock Absorber-Marine Engine Mounts 180mm screw (Ancor), Antivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results.The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%...

98.73€ 94.79€ Ex Tax: 77.06€

Engine Shock Absorber-Marine Engine Mounts L M20 600KG

Engine Shock Absorber-Marine Engine Mounts L M20 600KG, Flexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore)..

166.67€ 160.01€ Ex Tax: 130.09€

Engine Shock Absorber-Marine Engine Mounts M M16 280KG

Engine Shock Absorber-Marine Engine Mounts M M16 280KG, Flexible mounts for medium power Diesel engines. Det Norske Veritas certified. 110 mm length M16 threaded stud. (SH = Shore)..

78.16€ 75.04€ Ex Tax: 61.00€

Engine Shock Absorber-Marine Engine Mounts ROUND M M12

Engine Shock Absorber-Marine Engine Mounts ROUND M M12, Flexible mounts for medium power Diesel engines. 100mm length M12 threaded stud. (SH = Shore)..

48.68€ 46.73€ Ex Tax: 37.99€

Engine Shock Absorber-Marine Engine Mounts S M12 95KG

Engine Shock Absorber-Marine Engine Mounts S M12 95KG, Flexible mounts for small power Diesel engines. Det Norske Veritas certified. 100 mm length M12 threaded stud. (SH = Shore)..

36.86€ 35.39€ Ex Tax: 28.77€

Engine Shock Absorber-Marine Engine Mounts VD M12 100KG

Engine Shock Absorber-Marine Engine Mounts VD M12 100KG, V structure flexible mount for big stress with little load. For small engines working most of the time at low run...

106.68€ 102.42€ Ex Tax: 83.26€

Engine Shock Absorber-Marine Engine Mounts VD M12 120KG

Engine Shock Absorber-Marine Engine Mounts VD M12 120KG, V structure flexible mount for big stress with little load. For small engines working most of the time at low run...

106.68€ 102.42€ Ex Tax: 83.26€

Engine Shock Absorber-Marine Engine Mounts Y M16 180KG

Engine Shock Absorber-Marine Engine Mounts Y M16 180KG, Yanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..

110.61€ 106.19€ Ex Tax: 86.33€

Engine Shock Absorber-Marine Engine Mounts Y M16 80KG

Engine Shock Absorber-Marine Engine Mounts Y M16 80KG, Yanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..

110.61€ 106.19€ Ex Tax: 86.33€

Galvanized Steel Engines Support 120mm M12 85kg (Ancor)

Galvanized Steel Engines Support 120mm M12 85kg (Ancor), Galvanized steel elastic support with pin..

63.65€ 61.10€ Ex Tax: 49.67€

Galvanized Steel Engines Support 183mm M16 190kg (Ancor)

Galvanized Steel Engines Support 183mm M16 190kg (Ancor), Galvanized steel elastic support with pin..

80.14€ 76.93€ Ex Tax: 62.55€

Galvanized Steel Engines Support 230mm M16 500kg (Ancor)

Galvanized Steel Engines Support 230mm M16 500kg (Ancor), Galvanized steel elastic support with pin..

148.47€ 142.53€ Ex Tax: 115.88€

MerCruiser front engine mount 3/4" 19mm thread (814263A1)

MerCruiser front engine mount 3/4" 19mm thread (814263A1), Front engine mount, for all MerCruiser engines. Engine support - Max 135 kg Price per piece OEM Reference: 814263A1Reference: GS38105Mercruiser:A 812430A1, 814263A1Same as: GLM50020..

60.14€ Ex Tax: 60.14€

MerCruiser front engine mount 5/8" 16mm thread (35852)

MerCruiser front engine mount 5/8" 16mm thread (35852), Front engine mount, for all MerCruiser engines. Price per piece. OEM Reference: 35852Mercruiser: 33201, 35852Reference: GS38122 ..

60.14€ Ex Tax: 60.14€

Orbitrade 19107 Flexible Rubber Mount for Volvo Penta Engines

Orbitrade 19107 Flexible Rubber Mount for Volvo Penta Engines, Orbitrade Marine flexible rubber engine mounting designed to replace Volvo part number 682694. This engine mount is used for suspension support and is supplied with 2 nuts and 2 washers for installation. The rubber mount is suitable for the following Volvo Penta marine engine models: AQ165A, AQ170A, AQ170B, AQ170C. Specifica..

49.42€ Ex Tax: 40.18€

Orbitrade 22050 Flexible Rubber Mount 64mm OD for Volvo Penta Engines

Orbitrade 22050 Flexible Rubber Mount 64mm OD for Volvo Penta Engines, Orbitrade Marine flexible rubber engine mounting designed to replace Volvo part number 833950. This engine mount is supplied with 1 nut (part number 19850) for installation. The outside diameter of the rubber mount is 64mm and it is 40mm high. The stud above the mounting measures 35mm long and features a 3/8" UNC thread. There is also an M10 threaded ..

51.54€ Ex Tax: 41.90€

Orbitrade 22144 Flexible Rubber Mount 64mm OD for Volvo Penta Engines

Orbitrade 22144 Flexible Rubber Mount 64mm OD for Volvo Penta Engines, Orbitrade Marine flexible rubber engine mounting designed to replace Volvo part numbers 849170, 833315, 833625, 807464 and 833720. This engine mount is supplied with 2 nuts (part number 19850) for installation. The outside diameter of the rubber mount is 64mm and it is 40mm high. The stud above the mounting measures 35mm long and the stud below the mo..

75.96€ Ex Tax: 61.76€

R&D Compression Flexible Engine Mount (100-180LBS / 5/8" Stud)

R&D Compression Flexible Engine Mount (100-180LBS / 5/8" Stud), The compression flexible engine mounting is a low height mount with minimum deflection. Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more. Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of the height adjusting nut and the top washer of the m..

95.13€ Ex Tax: 77.34€

R&D Compression Flexible Engine Mount (160-370LBS / 5/8" Stud)

R&D Compression Flexible Engine Mount (160-370LBS / 5/8" Stud), The compression flexible engine mounting is a low height mount with minimum deflection. Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more. Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of the height adjusting nut and the top washer of the ..

152.73€ Ex Tax: 124.17€

R&D Compression Flexible Engine Mount (190LBS / 5/8" Stud)

R&D Compression Flexible Engine Mount (190LBS / 5/8" Stud), The R&D compression flexible engine mounting is a competitive, low height, medium capacity mount giving good engine control. Typical uses: 2 & 3 Cylinder Long Stroke, 1, 2 & 3 Cylinder Short Stroke High Speed, 4 Cylinder. Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of..

74.71€ Ex Tax: 60.74€

R&D Compression Flexible Engine Mount (300LBS / 5/8" Stud)

R&D Compression Flexible Engine Mount (300LBS / 5/8" Stud), The R&D compression flexible engine mounting is a competitive, low height, medium capacity mount giving good engine control. Typical uses: 2 & 3 Cylinder Long Stroke, 1, 2 & 3 Cylinder Short Stroke High Speed, 4 Cylinder. Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of..

89.11€ Ex Tax: 72.44€

R&D Compression Flexible Engine Mount (320-500LBS / 5/8" Stud)

R&D Compression Flexible Engine Mount (320-500LBS / 5/8" Stud), The compression flexible engine mounting is a low height mount with minimum deflection. Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more. Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of the height adjusting nut and the top washer of the m..

167.13€ Ex Tax: 135.88€

R&D Double Acting Shear Loaded Engine Mount (100-420LBS / 5/8" Stud)

R&D Double Acting Shear Loaded Engine Mount (100-420LBS / 5/8" Stud), The 800-032 double acting shear engine mount is a unique engine mounting incorporating two rubber elements which are pre-loaded against each other, giving excellent isolation together with good control on problem installations. The R&D 800-032 marine flexible engine mount is suitable for a maximum load of 46kg to 190kg (100lbs to 420lbs). The dimensi..

195.72€ Ex Tax: 159.12€

R&D Double Acting Shear Loaded Engine Mount (160-670LBS / 5/8" Stud)

R&D Double Acting Shear Loaded Engine Mount (160-670LBS / 5/8" Stud), The double acting shear engine mount is a unique mounting incorporating two rubber elements which are pre-loaded against each other, giving excellent isolation together with good control on problem installations. This flexible engine mount is suitable for a maximum load of 73kg to 305kg (160lbs to 670lbs). The dimensions of the double acting shear lo..

210.12€ Ex Tax: 170.83€

R&D Double Acting Shear Loaded Engine Mount (160-671LBS / 3/4" Stud)

R&D Double Acting Shear Loaded Engine Mount (160-671LBS / 3/4" Stud), The double acting shear engine mount is a unique mounting incorporating two rubber elements which are pre-loaded against each other, giving excellent isolation together with good control on problem installations. This flexible engine mount is suitable for a maximum load of 73kg to 305kg (160lbs to 671lbs). The dimensions of the double acting shear lo..

208.22€ Ex Tax: 169.29€

R&D Flexible Engine Mount (Shear Type / 120 - 410LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 410LBS / 5/8" Stud), R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope..

113.70€ Ex Tax: 92.44€

R&D Flexible Engine Mount (Shear Type / 120 - 411LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 411LBS / 3/4" Stud), R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope ..

133.18€ Ex Tax: 108.28€

R&D Flexible Engine Mount (Shear Type / 120 - 412LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 412LBS / 5/8" Stud), R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope ..

138.97€ Ex Tax: 112.98€

R&D Flexible Engine Mount (Shear Type / 120 - 413LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 413LBS / 3/4" Stud), R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope ..

134.95€ Ex Tax: 109.72€

R&D Flexible Engine Mount (Shear Type / 250 - 560LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 560LBS / 5/8" Stud), R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope ..

113.70€ Ex Tax: 92.44€

R&D Flexible Engine Mount (Shear Type / 250 - 561LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 561LBS / 3/4" Stud), R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope ..

147.58€ Ex Tax: 119.98€

R&D Flexible Engine Mount (Shear Type / 250 - 562LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 562LBS / 5/8" Stud), R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope ..

153.37€ Ex Tax: 124.69€

R&D Flexible Engine Mount (Shear Type / 250 - 563LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 563LBS / 3/4" Stud), R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope ..

149.35€ Ex Tax: 121.43€