Damper and Couplings

Damper and Couplings

Damper and Couplings

Show:
Sort By:

Damper Plate for Marine Gearbox 352mm 26 teeth

Damper Plate for Marine Gearbox 352mm 26 teeth, Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc...

497.77€ 477.86€ Ex Tax: 388.50€

Vetus Bullflex Flexible Coupling Type-4 shaft 30mm

Vetus Bullflex Flexible Coupling Type-4 shaft 30mm, Vetus Bullflex flexible coupling for an excellent alignment of the propeller shaft due to a special centering ring. The Vetus Bullflex Coupling has been specially designed to ensure optimum damping of vibration, with excellent ease of installation. Its pre-tensioned rubber element ensures low-noise and vibration-free transmission, without backlash between the engine and the propeller shaft. Another strong point of the Bullflex coupling is th..

673.85€ 646.89€ Ex Tax: 525.93€

flexible coupling Jubo D117

flexible coupling Jubo D117, flexible mounts and couplings / drive transmissions > flexible damper couplings > jubo flexible coupling..

82.83€ 79.52€ Ex Tax: 64.65€

Damper Plate 190mm 1866 107 001

Damper Plate 190mm 1866 107 001, damper plates for gearboxes Twin Disc/Technodrive - Hurth etc...

163.34€ 156.81€ Ex Tax: 127.49€

Damper Plate for Marine Gearbox 155mm 26 teeth

Damper Plate for Marine Gearbox 155mm 26 teeth, Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc...

184.17€ 176.80€ Ex Tax: 143.74€

Damper Plate for Marine Gearbox 181mm 26 teeth

Damper Plate for Marine Gearbox 181mm 26 teeth, Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc...

343.81€ 330.06€ Ex Tax: 268.34€

Damper Plate for Marine Gearbox 202mm 26 teeth

Damper Plate for Marine Gearbox 202mm 26 teeth, Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc...

319.29€ 306.52€ Ex Tax: 249.20€

Damper Plate for Marine Gearbox 336mm 26 teeth

Damper Plate for Marine Gearbox 336mm 26 teeth, Damper plates for medium and large engine gearboxes Twin Disc/Technodrive – Warner - Hurth etc...

368.33€ 353.60€ Ex Tax: 287.48€

Damper Plate for Volvo Penta Engines Orbitrade 19389

Damper Plate for Volvo Penta Engines Orbitrade 19389, Orbitrade Marine spring damper plate designed to replace Volvo part numbers 855389, 831778, 841895 and 1326334. This is a 26 teeth splined drive plate with a 34mm diameter centre hole. This drive plate uses springs to dampen engine vibrations and noise and has 21 holes around the outside. They are suitable for the following Volvo Penta marine engine models: AQ115A, A..

1,016.56€ Ex Tax: 826.47€

Damper Plate Volvo Penta 831778

Damper Plate Volvo Penta 831778, Volvo Penta drive plate 230A, B, 250A, B, 251A,AD 31A, B, D, XDAQ115A, B, 120B, 125A, B, 130A, B, C, D,AQ 140A, 145A, B, 151A, B, C, 171A, CAQAD 31A, 40B, AQD40ABB115A, B, C, 140A, 145AKAD32PMB20A, B, C, 30A, 31A, 40ATAMD30A, B, 31A, B, D, 40A, BTMD30A, 31A, B, D, 40A, B, C Reference: REC855389Volvo Penta OEM: 831778, 841895, 855389 Absorber for Volvo Penta For This Part fits with the following Marine Engines: AQ115A 100B AQ115B 100B AQ130A AQ130B AQ130C AQ130D B..

780.06€ Ex Tax: 634.20€

Damper Plates 157.2mm 1866 061 001

Damper Plates 157.2mm 1866 061 001, damper plates for gearboxes Twin Disc/Technodrive - Hurth etc...

131.88€ 126.60€ Ex Tax: 102.93€

Drive Force Clutch Plate for Hurth HBW 10, 150 & 150 V-Drive Gearboxes

Drive Force Clutch Plate for Hurth HBW 10, 150 & 150 V-Drive Gearboxes, Drive Force single steel clutch plate for Hurth HBW 10, HBW 150 and 150 V-Drive series gearboxes. The Drive Force steel clutch plate replaces ZF 3306 302 050, with a 1.42mm thickness it should be used in conjunction with the sintered metal friction clutch plate DF288912. Clutch plate kits and complete clutch overhaul kits are also available for purch..

15.50€ Ex Tax: 12.60€

flexible coupling Jubo D142

flexible coupling Jubo D142, flexible mounts and couplings / drive transmissions > flexible damper couplings > jubo flexible coupling..

110.58€ 106.16€ Ex Tax: 86.31€

Flexible Coupling Propeller -Gearbox 115mm 1400 series

Flexible Coupling Propeller -Gearbox 115mm 1400 series, Flexible mounts and couplings for drive transmissions , flexible damper couplings..

68.66€ 65.92€ Ex Tax: 53.59€

Flexible Coupling Propeller -Gearbox 120mm 16 Holes

Flexible Coupling Propeller -Gearbox 120mm 16 Holes, 16 Hole flexible coupling for coupling flanges between propeller shaft and gearbox. Flexible mounts and couplings for drive transmissions , flexible damper couplings..

156.87€ 150.59€ Ex Tax: 122.43€

Flexible Coupling Propeller -Gearbox 120mm 8 Holes

Flexible Coupling Propeller -Gearbox 120mm 8 Holes, 8 Hole flexible coupling for coupling flanges between propeller shaft and gearbox. Flexible mounts and couplings for drive transmissions , flexible damper couplings..

68.66€ 65.92€ Ex Tax: 53.59€

Flexible Coupling Propeller -Gearbox 130mm 1100 series

Flexible Coupling Propeller -Gearbox 130mm 1100 series, Flexible mounts and couplings for drive transmissions , flexible damper couplings..

39.14€ 37.58€ Ex Tax: 30.55€

Flexible Coupling R&D 910-017

Flexible Coupling R&D 910-017, Manufactured by R&D Marine, the flexible coupling fits between the boat propeller shaft coupling and the gearbox output coupling. This flexible coupling consists of a contoured flexible disc moulded in tough yet resilient new type Polyester Elastomer. The contoured coupling disc gives clearance for bolt heads, and allows the coupling to flex freely to take up any temporary misalignment of ..

1,031.02€ Ex Tax: 838.23€

Flexible Coupling R&D 910-018 for PRM

Flexible Coupling R&D 910-018 for PRM, Manufactured by R&D Marine, the flexible coupling fits between the boat propeller shaft coupling and the gearbox output coupling. This flexible coupling consists of a contoured flexible disc moulded in tough yet resilient new type Polyester Elastomer. The contoured coupling disc gives clearance for bolt heads, and allows the coupling to flex freely to take up any temporary misalign..

1,030.61€ Ex Tax: 837.89€

Flexible Coupling R&D 910-026 for Twin Disc Couplings

Flexible Coupling R&D 910-026 for Twin Disc Couplings, Manufactured by R&D Marine, the flexible coupling fits between the boat propeller shaft coupling and the Twin Disc gearbox output coupling. This flexible coupling consists of a contoured flexible disc moulded in tough yet resilient new type Polyester Elastomer. The contoured coupling disc gives clearance for bolt heads, and allows the coupling to flex freely to take..

672.00€ Ex Tax: 546.34€

Flexible Coupling R&D 910-032 for 6" Gearbox Couplings

Flexible Coupling R&D 910-032 for 6" Gearbox Couplings, Manufactured by R&D Marine, the flexible coupling fits between the boat propeller shaft coupling and the gearbox output coupling. This flexible coupling consists of a contoured flexible disc moulded in tough yet resilient new type Polyester Elastomer. The contoured coupling disc gives clearance for bolt heads, and allows the coupling to flex freely to take up any t..

1,030.61€ Ex Tax: 837.89€

Flexible Coupling R&D 910-040

Flexible Coupling R&D 910-040, Manufactured by R&D Marine, the flexible coupling fits between the boat propeller shaft coupling and the PRM gearbox output coupling. This flexible coupling consists of a contoured flexible disc moulded in tough yet resilient new type Polyester Elastomer. The contoured coupling disc gives clearance for bolt heads, and allows the coupling to flex freely to take up any temporary misalignment..

1,549.69€ Ex Tax: 1,259.91€

PRM Gearbox Adaptor Plate (SAE 2 to PRM 500 & 750)

PRM Gearbox Adaptor Plate (SAE 2 to PRM 500 & 750), This PRM MT1212S/A gearbox adaptor plate is suitable to adapt from SAE 2 to PRM 500 and PRM 750 gearbox models. The adaptor plate comes with all the required fittings. Specifications Brand PRM Gearbox Model PRM 500|P..

551.94€ Ex Tax: 448.73€

PRM Gearbox Adaptor Plate (SAE 3 to PRM 260 & PRM 280)

PRM Gearbox Adaptor Plate (SAE 3 to PRM 260 & PRM 280), This PRM MT854S/A adapter plate is used to adapt from SAE 3 to PRM 260 and PRM 280 gearbox models. A gearbox adapter plate is used to allow an engine swap without having to buy a new gearbox. Specifications Brand PRM Gearbox Model ..

418.45€ Ex Tax: 340.20€

PRM Gearbox Adaptor Plate (SAE 3 to PRM 500 & PRM 750)

PRM Gearbox Adaptor Plate (SAE 3 to PRM 500 & PRM 750), PRM MT1211S/A adaptor plate. This PRM gearbox adaptor plate will mount a PRM500D gearbox or a PRM750D gearbox to an SAE 3 housing. (SAE refers to the number of bolt holes and the pitch circle diameter of the holes. Please note - This gearbox adaptor plate is suitable for the PRM 500D & PRM 750D gearboxes only. It does not fit the fit the PRM 750C Inline gearbox or..

457.27€ Ex Tax: 371.77€

PRM Gearbox Adaptor Plate (SAE 4 to PRM 500 & 750)

PRM Gearbox Adaptor Plate (SAE 4 to PRM 500 & 750), This PRM MT1216S/A gearbox adaptor plate is suitable to adapt from SAE 4 to PRM 500 and PRM 750 marine gearboxes. The adaptor plate comes with all the required fittings. Specifications Brand PRM Gearbox Model PRM 500..

445.24€ Ex Tax: 361.99€

PRM Gearbox Adaptor Plate (SAE 5 to PRM 260 & PRM 280)

PRM Gearbox Adaptor Plate (SAE 5 to PRM 260 & PRM 280), This PRM MT1209S/An adapter plate used to adapt from SAE 5 to PRM 260 and PRM 280 gearboxes. A gearbox adapter plate is used to allow an engine swap without having to buy a new gearbox. Specifications Brand PRM Gearbox Model ..

419.63€ Ex Tax: 341.16€

PRM Gearbox Adaptor Plate (SAE 5 to PRM 60, 80, 90, 120, 125 & 150)

PRM Gearbox Adaptor Plate (SAE 5 to PRM 60, 80, 90, 120, 125 & 150), This PRM MT4901 S/A gearbox adaptor plate (208551) is suitable to adapt from SAE 5 to PRM 60, PRM 80, PRM 90, PRM 120, PRM 125 and PRM 150 gearboxes. The adaptor plate comes with the required fittings. Specifications Brand PRM Gearbox Model..

525.96€ Ex Tax: 427.61€

R&D Drive Plate For Borgwarner (26 Teeth Spline, 180.8mm OD, 300 lbft)

R&D Drive Plate For Borgwarner (26 Teeth Spline, 180.8mm OD, 300 lbft), Fitted between the marine engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also called the Driven Plate, Damper Plate or Clutch Pla..

312.80€ Ex Tax: 254.31€

R&D Drive Plate For Borgwarner (26 Teeth Spline, 266.7mm OD, 100 lbft)

R&D Drive Plate For Borgwarner (26 Teeth Spline, 266.7mm OD, 100 lbft), 2B37 R & D Marine Engine Damper Drive Plate Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also called the Driv..

252.50€ Ex Tax: 205.28€

R&D Drive Plate For Borgwarner (26 Teeth Spline, 298.5mm OD, 100 lbft)

R&D Drive Plate For Borgwarner (26 Teeth Spline, 298.5mm OD, 100 lbft), 2B8 R&D Marine Boat Engine Damper Drive Plate Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also called t..

243.90€ Ex Tax: 198.30€

R&D Drive Plate For Borgwarner (26 Teeth Spline, 336.5mm Diameter)

R&D Drive Plate For Borgwarner (26 Teeth Spline, 336.5mm Diameter), 3M3 Boat Engine Damper Drive Plate from R&D Marine Fitted between the marine engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also calle..

351.47€ Ex Tax: 285.75€

R&D Drive Plate For Borgwarner (26 Teeth Spline, 362mm OD, 400 lb ft)

R&D Drive Plate For Borgwarner (26 Teeth Spline, 362mm OD, 400 lb ft), 3M2 Boat Engine Damper Drive Plate from R&D Marine Fitted between the marine engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also ca..

351.47€ Ex Tax: 285.75€

R&D Drive Plate For PRM (10 Teeth Spline / 152mm Diameter)

R&D Drive Plate For PRM (10 Teeth Spline / 152mm Diameter), 13B16 Engine / Gearbox Damper Drive Plate by R&D Marine Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also called the ..

194.41€ Ex Tax: 158.06€

R&D Drive Plate For PRM (10 Teeth Spline, 155.45mm OD, 100 lb ft)

R&D Drive Plate For PRM (10 Teeth Spline, 155.45mm OD, 100 lb ft), 13B4 Marine Engine Damper Drive Plate from R&D Marine Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also calle..

185.82€ Ex Tax: 151.07€

R&D Drive Plate For PRM (10 Teeth Spline, 298.5mm OD, 100 lbft Torque)

R&D Drive Plate For PRM (10 Teeth Spline, 298.5mm OD, 100 lbft Torque), 13B8 Marine Boat Engine Damper Drive Plate from R&D Marine Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. A..

243.90€ Ex Tax: 198.30€

R&D Drive Plate For PRM (10 Teeth Spline, 298.5mm OD, 180 lbft Torque)

R&D Drive Plate For PRM (10 Teeth Spline, 298.5mm OD, 180 lbft Torque), 14E1 Boat Engine Damper Drive Plate from R&D Marine Fitted between the marine engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also ..

326.44€ Ex Tax: 265.40€

R&D Drive Plate For PRM (17 Teeth Spline, 155.45mm OD, 100 lb ft)

R&D Drive Plate For PRM (17 Teeth Spline, 155.45mm OD, 100 lb ft), 12B4 Marine Engine Damper Drive Plate from R&D Marine Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also called..

185.82€ Ex Tax: 151.07€

R&D Drive Plate For PRM (17 Teeth Spline, 352.5mm OD, 550 lbft Torque)

R&D Drive Plate For PRM (17 Teeth Spline, 352.5mm OD, 550 lbft Torque), 31R5 R & D Marine Gearbox Damper Drive Plate Fitted between the engine and the PRM gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also called the..

390.94€ Ex Tax: 317.83€

R&D Drive Plate For PRM (17 Teeth Spline, 362mm OD, 400 lb ft Torque)

R&D Drive Plate For PRM (17 Teeth Spline, 362mm OD, 400 lb ft Torque), 18M2 R & D Marine Engine Damper Drive Plate Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also called the ..

351.47€ Ex Tax: 285.75€

R&D Drive Plate For PRM (18 Teeth Spline / 352.5mm Diameter)

R&D Drive Plate For PRM (18 Teeth Spline / 352.5mm Diameter), The R & D Marine gearbox damper drive plate is fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D damper drive plates include a 'failsafe' design. Also called the driven pla..

568.88€ Ex Tax: 462.51€

R&D Drive Plate For PRM 500 (17 Teeth Spline / 352.5mm Diameter)

R&D Drive Plate For PRM 500 (17 Teeth Spline / 352.5mm Diameter), Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also called the Driven Plate, Damper Plate or Clutch Plate, this Damp..

447.75€ Ex Tax: 364.03€

R&D Drive Plate For PRM 500 750 (17 Teeth Spline / 362mm Diameter)

R&D Drive Plate For PRM 500 750 (17 Teeth Spline / 362mm Diameter), Fitted between the engine and the PRM gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also called the Driven Plate, Damper Plate or Clutch Plate, thi..

447.75€ Ex Tax: 364.03€

R&D Drive Plate For ZF Hurth & PRM (10 Teeth Spline / 266.7mm OD)

R&D Drive Plate For ZF Hurth & PRM (10 Teeth Spline / 266.7mm OD), 22B37 R & D Marine Engine Damper Drive Plate Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Marine Damper Drive plates include a 'failsafe' design. Also called the Dr..

255.49€ Ex Tax: 207.72€

R&D Drive Plate For ZF Hurth & PRM (10 Teeth Spline, 298.5mm Diameter)

R&D Drive Plate For ZF Hurth & PRM (10 Teeth Spline, 298.5mm Diameter), 22B8 Marine Boat Engine Damper Drive Plate from R&D Marine Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. ..

243.90€ Ex Tax: 198.30€

R&D Drive Plate For ZF Hurth (10 Teeth Spline, 266.7mm OD, 100 lb ft)

R&D Drive Plate For ZF Hurth (10 Teeth Spline, 266.7mm OD, 100 lb ft), 22AM37 R & D Marine Engine Damper Drive Plate Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design. Also called th..

279.99€ Ex Tax: 227.63€

R&D Flexible Coupling 910-001 for 4" Couplings

R&D Flexible Coupling 910-001 for 4" Couplings, Manufactured by R&D Marine, the flexible coupling fits between the boat propeller shaft coupling and the gearbox output coupling. This flexible coupling consists of a contoured flexible disc moulded in tough yet resilient new type Polyester Elastomer. The contoured coupling disc gives clearance for bolt heads, and allows the coupling to flex freely to take up any temporary..

181.63€ Ex Tax: 147.67€

R&D Flexible Coupling 910-002 for 4" Yanmar Couplings

R&D Flexible Coupling 910-002 for 4" Yanmar Couplings, Manufactured by R&D Marine, the flexible coupling fits between the boat propeller shaft coupling and the gearbox output coupling. This flexible coupling consists of a contoured flexible disc moulded in tough yet resilient new type Polyester Elastomer. The contoured coupling disc gives clearance for bolt heads, and allows the coupling to flex freely to take up any te..

172.93€ Ex Tax: 140.59€

R&D Flexible Coupling 910-003 for 6" Couplings

R&D Flexible Coupling 910-003 for 6" Couplings, Manufactured by R&D Marine, the flexible coupling fits between the boat propeller shaft coupling and the gearbox output coupling. This flexible coupling consists of a contoured flexible disc moulded in tough yet resilient new type Polyester Elastomer. The contoured coupling disc gives clearance for bolt heads, and allows the coupling to flex freely to take up any temporary..

437.59€ Ex Tax: 355.77€

R&D Flexible Coupling 910-004 for 4" Couplings

R&D Flexible Coupling 910-004 for 4" Couplings, Manufactured by R&D Marine, the flexible coupling fits between the boat propeller shaft coupling and the gearbox output coupling. This flexible coupling consists of a contoured flexible disc moulded in tough yet resilient new type Polyester Elastomer. The contoured coupling disc gives clearance for bolt heads, and allows the coupling to flex freely to take up any temporary..

209.47€ Ex Tax: 170.30€